一関の調査ではシャフト2とシャフト3の圧入不足との情報。発生原因調査中

一関の調査ではシャフト2とシャフト3の圧入不足との情報。発生原因調査中。
⇒圧入に使用するプレス機が最後まで降りなかったため圧入不足となったものと推測している。
⇒シャフト2の加工穴に切り子が詰まっており圧入の妨げとなっていた。"
"①シャフト長さを全数確認する。
②加工区に改善要求する。
"

Kết quả (Anh) 1:

Lack of ichinoseki fitting of shaft 3 with shaft 2 of the information. Caused during the investigation.⇒ guessing and was fitting enough to reapply to the end to use injection presses.⇒ had become a way of fitting the facets in the hole of shaft 2. ""(1) 100% verify the shaft length.(2) in the processing zones to request improvements."

Kết quả (Anh) 2:

The information of the press-fit lack of shaft 2 and the shaft 3 in the investigation of Ichinoseki. Cause under investigation.
⇒ it is speculated that the press to be used for press-fitting is a press-deficient because not down to the end.
⇒ This has been an obstacle to press are filled with faceted in processing hole of the shaft 2. "
"I want to confirm the total number ① shaft length.
② I improve request to the Processing Zone.
"

Kết quả (Anh) 3:

The shaft and the shaft 2 and 3 of the lack of information in the record of investigation. In the investigation of the cause. Press machine used for
⇒ pressed down until the end and not for lack of stimulation and speculation. In the process of
⇒ shaft 2 full cut and interfere with the press. Make sure all "
"① shaft length. In
② processing request.
"